Description | ASTM | UNS | JIS | Chemical Composition | Feature | Application | ||
---|---|---|---|---|---|---|---|---|
Forging / Bar | Casting | Forging / Bar | Forging / Bar | Casting | ||||
Austenitic Cr-Ni Stainless Steel | A182 F304 | A351 CF8 | UNS S30400 | SUS304 | SCS13A | 18Cr-8Ni | High anti-corrosion performance against nitic acid, phosphorous acid and organic acid. But not strong against sulfuric acid | VCM, PTA, Coal Gasification Chemical |
Austenitic Cr-Ni Stainless Steel | A182 F304L | A351 CF3 | UNS S30403 | SUS304L | SCS19A | 18Cr-8Ni-LS(2) | Improved type of SCS13A on anti-intergranular corrosion | VCM, PTA, Coal Gasification Chemical |
Austenitic Cr-Ni Stainless Steel | A182 F316 | A351 CF8M | UNS S31600 | SUS316 | SCS14A | 18Cr-9Ni-2Mo | Good anti-corrosive performance against fluids except hydrochloric acid, flourine acid, high concentration and temparature of sulfuric acid and phosphorous acid | VCM, PTA, Coal Gasification Chemical |
Austenitic Cr-Ni Stainless Steel | A182 F316L | A351 CF3M | UNS S31603 | SUS316L | SCS16A | 18Cr-9Ni-2Mo-LC(1) | Improved type of SCS14A on anti-intergranular corrosion | VCM, PTA, Coal Gasification Chemical |
Austenitic Cr-Ni Stainless Steel | A182 F347 | A351 CF8C | UNS S34700 | SUS347 | SCS21 | 18Cr-10Ni-Nb | Carbide material is more stable by adding Nb. Higher performance on anti-intergranular corrosion comparing with SCS13A. | VCM, PTA, Coal Gasification Chemical |
Austenitic Cr-Ni Stainless Steel | A182 F317 | A351 CG8M | UNS S31700 | SUS317 | - | 18Cr-12Ni-3.5Mo | Performances on anti-pitting corrosion and anti-crevice corrosion are improved comparing with SCS14A | VCM, PTA, Coal Gasification Chemical |
Austenitic Cr-Ni Stainless Steel | A182 F317L | A351 CG3M | UNS S31703 | SUS317L | - | 18Cr-12Ni-3.5Mo-LC(2) | VCM, PTA, Coal Gasification Chemical | |
Carpenter 20 | A182 F20 | A351 CN7M | UNS N08020 | - | - | 21Cr-29Ni-2.5Mo-3.5Cu | VCM, PTA, Coal Gasification Chemical | |
Austenitic Cr-Ni Stainless Steel | A182 F310S | A351 CK20 | UNS S31008 | SUS 310S | SCS18 | 25Cr-20Ni | Cr and Ni are higher than SCS13A. Good performance against sulfur dioxide solutions and dilute sulfuric acid at the normal temperature. | VCM, PTA, Coal Gasification Chemical |
Austenitic Ni-Cr-Mo-N Stainless Steel | A182 F62 | A351 CN3MN | UNS N08367 | SUS836L | - | 21Cr-24Ni-6.5Mo-N | Best performance against anti-acid and anti-alkaline among general austenitic stainless steels | VCM, PTA, Coal Gasification Chemical |
Austenitic Ni-Cr-Mo-N Stainless Steel | A182 F44 | A351 CK3MCuN | UNS S31254 | - | - | 20Cr-18Ni-6.5Mo-N-Cu | VCM, PTA, Coal Gasification Chemical | |
Duplex Cr-Ni-N Stainless Steel | A182 F51 | A995 Gr.1B CD4MCuN | UNS S31803 | SUS329 J3L | - | 22Cr-5Ni-3Mo-N | Good anti-SCC and anti-pitting corrosion performance against those conditions as medium concentratio level of chloride and dilute sulfuric acid and phosphoric acid. | VCM, PTA, Coal Gasification Chemical |
Duplex Cr-Ni-Mo-W Stainless Steel | A182 F53 | A890 Gr.5A CD3MWCuN | UNS S32750 | SUS329 J4L | - | 25Cr-7Ni-3Mo-Cu-N-W | Better performance of anti-stress corrosion than austenitic stainless steels and easier for welding than ferrite stainless steels. Higher acid resistance, anti-pitting corrosion and anti-crevice corrosion than SCS16A | VCM, PTA, Coal Gasification Chemical |
Description | ASTM | UNS | JIS | Chemical Composition | Feature | Application | ||
---|---|---|---|---|---|---|---|---|
Forging / Bar | Casting | Forging / Bar | Forging / Bar |
Casting | ||||
Inconel 600 (Bar) | B166 N06600 | A494 CY40 | UNS N06600 | NCF600 | NCrFC | 78Ni-15Cr-5Fe | Good performance of anti-oxidation at high temperature and of stress corrosion against CI- and of anti-corrosion against alkarine conditions. | Coal Gasification |
Inconel 625 (Bar) | B446 N06625 | A494 CW6MC | UNS N06625 | NCF625 | - | 65Ni-22Cr-9Mo-3.5Nb | Good performance of anti-oxidation and anti-corrosion at high temperature. Good performance of anti-erosion. | Coal Gasification |
Hastelloy C276 (Bar) | B574 N10276 | A494 CW12MW | UNS N10276 | NMCrB | NMCrC | 58Ni-16Cr-16Mo-6Fe-4W | Good anti-corrosion performance against oxdazing conditions under humid chlorine gas and chlorine dioxide. Good perfomance of anti-corrosion against acetic acid and seawater. | Acetic Acid |
Hastelloy C22 (Bar) | B574 N06022 | A494 CX2MWC | UNS N06022 | - | - | 58Ni-21Cr-14Mo-4Fe-3W | Acetic Acid | |
Hastelloy B (Bar) | B335 N10001 | A494 N-12MV | UNS N10001 | NM1B | NMC | 67Ni-28Mo-5Fe | High performance against all concentration level of hydrochloric acid up to the boiling point. Good performance against redusing chrolide as 60% or lower sulfuric acid, phosphoric acis or cupric chloride. Good performance at high temparature but cannot resist against strong oxidazing conditions. | Acetic Acid |
Hastelloy B2 (Bar) | B335 N10665 | A494 N-7M | UNS N10665 | NM2B | - | 68Ni-31Mo-1Fe | Acetic Acid | |
Incolloy 800HT (Bar) | B408 N08811 | A351 CT15C | UNS N08811 | NCF800 | - | 33Ni-20Cr-45Fe-Nb | Good performance of anti-oxidation and anti-carburizing at high temperature | Polysilicon |
Incolloy 825 (Bar) | B425 N08825 | A494 CU5MCuC | UNS N08825 | NCF825 | - | 43Ni-22Cr-3Mo-30Fe-Nb | Good performance against sulfuric acid, phosphoric acid, anti-stress corrosion and anti crevice corrosion | Petro Chemical |
Monel 400 (Bar) | - | A494 M-35-1 | UNS N04400 | SUS 310S | SCS18 | 25Cr-20Ni | Good anti-corrosion performance against reducing conditions and no local corrosion. Strong against stress corrosion by CI- | Coal Gasification |
Description | ASTM | UNS | JIS | Chemical Composition | Feature | Application | ||
---|---|---|---|---|---|---|---|---|
Forging / Bar | Casting | Forging / Bar | Forging / Bar |
Casting | ||||
Titanium Unalloyed Grade 2 | B381 F2 | B367 C2 | UNS R50400 | TB340H | - | 99Ti-0.2Fe | Good anti-corrosion performance against strong acid as nitic acid, organic chemicals as acetic acid and sea water | PTA / Acetic Acid |
Titanium Unalloyed Grade 3 | B381 F3 | B367 C3 | UNS R50550 | TB480H | - | 99Ti-0.25Fe | PTA / Acetic Acid | |
Titanium alloy Grade 5 | B381 F5 | B367 C5 | UNS R56400 | TAB6400H | - | 90Ti-6Ai-4V | Good anti-corrosion performance against strong acid and higher strength in anti-torsion comparing with T2/T3 | PTA / Acetic Acid |
Titanium Low alloyed Grade 7 | B381 F7 | B367 C7 | UNS R52400 | TB340PdH | - | 99Ti-0.15Pa | Good performance of anti-crevice corrosion against strong acid and organic chemical compound | PTA / Acetic Acid |
Titanium alloy Grade 12 | B381 F12 | - | UNS R53400 | - | - | 98Ti-0.3Mo-0.8Ni | Good performance of anti-corrosion against high temparature sulfuric acid | Nickel Mining |